CW SERIES
All Lift Cranes® Cantilevered 2-3 Ton Wall Mounted Jib Cranes provide hoist coverage and 200 degrees of rotation. This jib has the advantage of providing maximum lift for the hoist, since it can be installed very close to the underside of the lowest ceiling obstruction. It is composed of a vertical mast mounted to 2 brackets on a wall or vertical building beam with a boom that cantilevers out, perpendicular from the wall at the top.
Application
For individual use in bays, along walls, or columns of plants, or as a supplement to an overhead crane or monorail system; this Cantilevered 2-3 Ton Wall Mounted Jib Crane would be the perfect application.
Also available is our 1/4 – 1 Ton Cantilevered Wall Mounts
Need to do a custom application or design? Contact us for a quote.
Span Range
- Min. 8’ Span
- Max. 20’ Span
Additional Options
- Tagline Kits
- Rotation Bumpers
- Hoists and Trolleys
Installation Requirements
- Must have a structurally sound wall, column, or base for supporting the Jib Crane.
- Allow for 3” clearance above and along entire length of boom.
- Use grade 5 or better Mounting Bolts – Not included.
| CAPACITY LBS |
MODEL # | SPAN | BRACKET CENTERS |
BEAM HEIGHT |
FLANGE WIDTH |
THRUST & PULL |
UNIT WEIGHT |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4,000 | CW408 | 8′ | 4′-0″ | 12″ | 6 ½” | 9,950 # | 488 # | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4,000 | CW410 | 10′ | 4′-0″ | 12″ | 6 ½” | 12,445 # | 548 # | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4,000 | CW412 | 12′ | 4′-0″ | 12″ | 6 ½” | 14,975 # | 608 # | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4,000 | CW414 | 14′ | 5′-0″ | 16″ | 7″ | 14,350 # | 904 # | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4,000 | CW416 | 16′ | 6′-0″ | 21″ | 6 ½” | 14,075 # | 1,332 # | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4,000 | CW418 | 18′ | 6′-0″ | 21″ | 6 ½” | 15,990 # | 1,497 # | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4,000 | CW420 | 20′ | 7′-6″ | 24″ | 7″ | 14,650 # | 1,876 # |
| CAPACITY LBS |
MODEL # | SPAN | BRACKET CENTERS |
BEAM HEIGHT |
FLANGE WIDTH |
THRUST & PULL |
UNIT WEIGHT |
| 6,000 | CW608 | 8′ | 4′-0″ | 16″ | 7″ | 14,855 # | 691 # |
| 6,000 | CW610 | 10′ | 4′-0″ | 16″ | 7″ | 18,600 # | 775 # |
| 6,000 | CW612 | 12′ | 6′-0″ | 16″ | 7″ | 14,950 # | 1,048 # |
| 6,000 | CW614 | 14′ | 6′-0″ | 16″ | 7″ | 17,665 # | 1,128 # |
| 6,000 | CW616 | 16′ | 6′-6″ | 21″ | 6 ½” | 18,975 # | 1,509 # |
| 6,000 | CW618 | 18′ | 7′-6″ | 24″ | 7″ | 18,750 # | 1,763 # |
| 6,000 | CW620 | 20′ | 9′-6″ | 24″ | 7″ | 16,655 # | 2,132 # |
NOTES:
- All weights are estimated & dimensions are subject to change
DEFINITION OF TERMS:
- Span (from center of hinge pin to the end of the beam)
- Thrust & Pull – The forces exerted by a crane on its supporting structure. Thrust is the pushing force, while pull is the tensile force. Maximum thrust & pull occurs when the crane is loaded to capacity
