Cantilevered Wall Mounted Jib Crane
CW SERIES

All Lift Cranes® Cantilevered Wall Mounted Jib Crane provides hoist coverage and 200 degrees of rotation. It has the advantage of providing maximum lift for the hoist, since it can be installed very close to the underside of the lowest ceiling obstruction. This Cantilevered Wall Mounted Jib is composed of a vertical mast mounted to 2 brackets on a wall or vertical building beam with a boom that cantilevers out, perpendicular from the wall at the top.

Application
For individual use in bays, along walls, or columns of plants, or as a supplement to an overhead crane or monorail system.

Also Available is our 2 and 3 Ton Cantilevered Wall Mounts

Need to do a custom application or design? Contact us for a quote.
Request a Quote

 

Span Range
  • Min. 8’ Span
  • Max. 20’ Span
Additional Options
  • Tagline Kits
  • Rotation Bumpers
  • Hoists and Trolleys
Installation Requirements
  • Must have a structurally sound wall, column, or base for supporting the Jib Crane.
  • Allow for 3” clearance above and along entire length of boom.
  • Use grade 5 or better Mounting Bolts – Not included.

 

CAPACITY
LBS		 MODEL # SPAN BRACKET
CENTERS		 BEAM
HEIGHT		 FLANGE
WIDTH		 THRUST
& PULL		 UNIT
WEIGHT
500 CW508 8′ 3′-0″ 6″ 4″ 2,185 # 253 #
500 CW510 10′ 3′-0″ 6″ 4″ 2,720 # 285 #
500 CW512 12′ 4′-0″ 6″ 4″ 2,560 # 361 #
500 CW514 14′ 4′-0″ 8″ 5 ¼” 2,975 # 458 #
500 CW516 16′ 4′-0″ 8″ 5 ¼” 3,526 # 500 #
500 CW518 18′ 4′-0″ 8″ 5 ¼” 4,150 # 542 #
500 CW520 20′ 4′-0″ 12″ 6 ½” 4,980 # 830 #
CAPACITY
LBS		 MODEL # SPAN BRACKET
CENTERS		 BEAM
HEIGHT		 FLANGE
WIDTH		 THRUST
& PULL		 UNIT
WEIGHT
1,000 CW108 8′ 3′-0″ 8″ 5 ¼” 3,785 # 311 #
1,000 CW110 10′ 3′-0″ 8″ 5 ¼” 4,750 # 353 #
1,000 CW112 12′ 3′-0″ 8″ 5 ¼” 5,768 # 395 #
1,000 CW114 14′ 4′-0″ 8″ 5 ¼” 5,145 # 540 #
1,000 CW116 16′ 4′-0″ 12″ 6 ½” 6,125 # 717 #
1,000 CW118 18′ 4′-0″ 12″ 6 ½” 6,950 # 777 #
1,000 CW120 20′ 6′-0″ 12″ 6 ½” 5,450 # 939 #
CAPACITY
LBS		 MODEL # SPAN BRACKET
CENTERS		 BEAM
HEIGHT		 FLANGE
WIDTH		 THRUST
& PULL		 UNIT
WEIGHT
2,000 CW208 8′ 4′-0″ 8″ 5 ¼” 5,250 # 414 #
2,000 CW210 10′ 5′-0″ 12″ 6 ½” 5,335 # 571 #
2,000 CW212 12′ 5′-0″ 12″ 6 ½” 6,450 # 631 #
2,000 CW214 14′ 5′-0″ 12″ 6 ½” 7,605 # 691 #
2,000 CW216 16′ 6′-0″ 12″ 6 ½” 7,390 # 787 #
2,000 CW218 18′ 6′-0″ 16″ 7″ 8,750 # 1,137 #
2,000 CW220 20′ 6′-0″ 16″ 7″ 9,805 # 1,251 #

 

NOTES:

  • All weights are estimated & dimensions are subject to change

DEFINITION OF TERMS:

  • Span (from center of hinge pin to the end of the beam)
  • Thrust & Pull – The forces exerted by a crane on its supporting structure. Thrust is the pushing force, while pull is the tensile force. Maximum thrust & pull occurs when the crane is loaded to capacity