FH SERIES
All Lift Cranes FH Series Half Ton Capacity Heavy Duty Foundationless Floor Mounted Jib Crane is the largest capacity JIB crane that does not require a pre-poured foundation. The FH Series Half Ton can be bolted to an existing concrete surface and are great in open areas where they can serve several work stations. Durable and long lasting, these overhead floor cranes feature a 360° rotating, rolled steel I-beam section with tapered flange for smooth trolley travel and removable safety end stops to ensure a limit to trolley travel. The Half Ton Heavy Duty Foundationless Jib has 48” diameter base and a 44” bolt circle with 12 holes measuring 1¼“each.
Application
Machining and assembly operations, outdoor use such as loading docks, and in conjunction with other jib cranes to provide staged coverage are just a few applications for this Foundationless Jib Crane.
Additional options:
- Tagline Kits with S-Hooks
- Rotation Stops
- Epoxy Anchor Kits
- Bolt Pattern Templates
- Outdoor & Stainless Steel Applications
- Hoist and Trolleys
- Top Entry Collector Ring
Installation requirements:
- Existing concrete must be a minimum of 6” thick reinforced with a minimum 3,000 psi (5 bag mix), soil pressure must support 2,500 psi.
- Concrete in and around the area, 10’ x 10’ square (5’ perimeter), of the base plate must be free of cracks, seams, joints, walls, delamination and must appear in good condition.
Foundation Size Requirements:
| Span | Foundation Size (sq.ft) |
|---|---|
| 15′ or less | 10′ x 10′ |
| 16′ to 20′ | 11′ x 11′ |
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | FH1108 | 10′ | 8′ | 8″ | 5 ¼” | 48″ | 1,083 # |
| 1,000 | FH11010 | 10′ | 10′ | 8″ | 5 ¼” | 48″ | 1,125 # |
| 1,000 | FH11012 | 10′ | 12′ | 8″ | 5 ¼” | 48″ | 1,167 # |
| 1,000 | FH11014 | 10′ | 14′ | 8″ | 5 ¼” | 48″ | 1,272 # |
| 1,000 | FH11016 | 10′ | 16′ | 12″ | 6 ½” | 48″ | 1,759 # |
| 1,000 | FH11018 | 10′ | 18′ | 12″ | 6 ½” | 48″ | 1,819 # |
| 1,000 | FH11020 | 10′ | 20′ | 12″ | 6 ½” | 48″ | 2,114 # |
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | FH1128 | 12′ | 8′ | 8″ | 5 ¼” | 48″ | 1,139 # |
| 1,000 | FH11210 | 12′ | 10′ | 8″ | 5 ¼” | 48″ | 1,181 # |
| 1,000 | FH11212 | 12′ | 12′ | 8″ | 5 ¼” | 48″ | 1,223 # |
| 1,000 | FH11214 | 12′ | 14′ | 8″ | 5 ¼” | 48″ | 1,328 # |
| 1,000 | FH11216 | 12′ | 16′ | 12″ | 6 ½” | 48″ | 1,858 # |
| 1,000 | FH11218 | 12′ | 18′ | 12″ | 6 ½” | 48″ | 1,918 # |
| 1,000 | FH11220 | 12′ | 20′ | 12″ | 6 ½” | 48″ | 2,223 # |
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | FH1148 | 14′ | 8′ | 8″ | 5 ¼” | 48″ | 1,195 # |
| 1,000 | FH11410 | 14′ | 10′ | 8″ | 5 ¼” | 48″ | 1,237 # |
| 1,000 | FH11412 | 14′ | 12′ | 8″ | 5 ¼” | 48″ | 1,279 # |
| 1,000 | FH11414 | 14′ | 14′ | 8″ | 5 ¼” | 48″ | 1,701 # |
| 1,000 | FH11416 | 14′ | 16′ | 12″ | 6 ½” | 48″ | 1,957 # |
| 1,000 | FH11418 | 14′ | 18′ | 12″ | 6 ½” | 48″ | 2,017 # |
| 1,000 | FH11420 | 14′ | 20′ | 12″ | 6 ½” | 48″ | 2,332 # |
NOTES:
- All Foundations should be checked by a Local Engineer
DEFINITION OF TERMS:
- Top Entry Collector Ring: Holds electric power cord in order to allow for a smooth, uninterrupted 360° rotation of Jib
- HUB: Height under beam)
- Span: Length from column center to the end of the beam
