L SERIES
All Lift Cranes® Light Duty Floor Mounted L-Series Half Ton Jib Cranes have a heavy wall structural steel pipe mast with a reinforced large diameter base plate. This allows for minimal deflection and continuous alignment. Durable and long lasting, these overhead floor cranes feature a 360° rotating, rolled steel I-beam section with tapered flange for smooth trolley travel and removable safety end stops to ensure a limit to trolley travel. All Light Duty Jibs have a 26” diameter base and 22” bolt circle with 6 holes measuring 1¼“ each.
Application
A welding station, small assembly, or light labor would be the perfect applications for this Light Duty Jib.
We also carry a smaller capacity jib crane, see our ¼ ton Light Duty Jib Cranes
Need to do a custom application or design? Contact us for a quote.
Range
- Min. 8’ HUB – 6’ Span
- Max. 12’ HUB – 14’ Span
Additional Options
- Tagline Kits with S-Hooks
- Bolt Pattern Templates
- Outdoor & Stainless Steel Applications
- Hoist and Trolleys
- Top Entry Collector Ring
Installation Requirements
- 3’ deep by 4’ square or 3’ deep by 5’ square cement foundation, depending on span.
- 3000 psi of compressive force-reinforced rebar 5/8” diameter on top and bottom, 12” on center.
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | L186 | 8′ | 6′ | 6″ | 4″ | 26″ | 573 # |
| 1,000 | L188 | 8′ | 8′ | 6″ | 4″ | 26″ | 605 # |
| 1,000 | L1810 | 8′ | 10′ | 8″ | 5 ¼” | 26″ | 728 # |
| 1,000 | L1812 | 8′ | 12′ | 8″ | 5 ¼” | 26″ | 770 # |
| 1,000 | L1814 | 8′ | 14′ | 8″ | 5 ¼” | 26″ | 812 # |
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | L1106 | 10′ | 6′ | 6″ | 4″ | 26″ | 617 # |
| 1,000 | L1108 | 10′ | 8′ | 6″ | 4″ | 26″ | 649 # |
| 1,000 | L11010 | 10′ | 10′ | 8″ | 5 ¼” | 26″ | 785 # |
| 1,000 | L11012 | 10′ | 12′ | 8″ | 5 ¼” | 26″ | 827 # |
| 1,000 | L11014 | 10′ | 14′ | 8″ | 5 ¼” | 26″ | 869 # |
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | L1126 | 12′ | 6′ | 6″ | 4″ | 26″ | 662 # |
| 1,000 | L1128 | 12′ | 8′ | 6″ | 4″ | 26″ | 694 # |
| 1,000 | L11210 | 12′ | 10′ | 8″ | 5 ¼” | 26″ | 841 # |
| 1,000 | L11212 | 12′ | 12′ | 8″ | 5 ¼” | 26″ | 883 # |
| 1,000 | L11214 | 12′ | 14′ | 8″ | 5 ¼” | 26″ | 981 # |
NOTES:
- All Foundations should be checked by a Local Engineer
DEFINITION OF TERMS:
- Top Entry Collector Ring (Holds electric power cord in order to allow for a smooth, uninterrupted 360° rotation of Jib)
- HUB (height under beam)
- Span (length from column center to the end of the beam)
